Most of the time, businesses will spend lots of money to purchase their lift trucks. It is essential, therefore to take good care of your machinery to protect your investment into the long run. It is really a great idea to know the procedures which are undertaken during maintaining and taking care of this machinery.
One of the best ways to tell how good the engine is running is by starting the forklift up and listening closely to see how it works. For instance, if there are any knocks or misses, the machinery is defective and this should raise several concerns. Furthermore listen carefully for any squealing sounds that come from the belts since these noises will provide you with a lot of information.
When performing maintenance, some of the main components you will need to pay attention to comprise the safety warning devices, horn, the overhead guard, the lights and the gauges. Any faulty parts or burnt out light bulbs need to be replaced as soon as they are noticed. It is also imperative to check the wiring.
After the above components have been inspected carefully, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Every cell of the battery should be checked in order to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machinery and after that change the filters. The fuel filters, hydraulic filter and the transmission filter should be frequently replaced. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
Once the oil change has been completed and new filters have been fitted, visually check the drive axle from underneath the equipment. Be certain to grease the axle if there is any grease fitting. Inspect the belts on the engine for any frays or cracks. If you find any, fix the problem accordingly. Next, check every other component of the machine like the wheels. If any kind of problem or fault is detected, be certain to address it immediately in order to make certain the equipment is working at its safest and optimum levels.